-450 specification
Advantage：
1 simple operation , Chinese and English operation system。
2 Double groove processing at the same time , 4 blades process and jump process at the same time .
3 Processing line’s quantity can be adjustable freely , speed reachs Max 40M/min
4 Processing board thickness arrive to thinnest 0.5mm。
5 blades Changing and reseing can be finished within 10 minutes .
6 V-CUT and jump cut 100 sets rememeber function.
7 High precision（±0.05mm）and high production（Max speed reachs 40M/min）。
8 Blade’s motor use Straight "type high speed motors, high quality in cutting .
9 Automatically set the board ‘s width , thickness , and v-groove ‘s position .（all controlled by sever motor and sever controller）
|
productive ability |
|
Processing width |
Min 80㎜～Max 450㎜ （like picture 1） |
|
Processing length |
Min 70㎜～Max450㎜ |
|
Processing thickness |
Min0.5㎜～Max2.4㎜ |
|
V-groove processingposition |
One cutting 3㎜～390㎜（like picture2） |
|
|
Two cutting 47㎜～447㎜ |
|
V-groove cutting quantity |
Once 2 line both two sides (sum up to 4 lines once) |
|
V–groove Residual thick precision
|
±0.05㎜ |
|
|
|
|
Machine dimensions |
|
|
Control system |
OMRON SYSMAC CJ1 |
|
|
YASKAWA sever controller industrial PC |
|
|
(absolute coordinate type) |
|
Processing bearing |
High-speed motor 400ω 4 bearings |
|
|
Blade dimension φ120 RPM 10000～15000RPM |
|
Belt moving |
Processing speed 7～40M/Min |
|
Jump blade |
Jump processing controled by sever motor, v-groove deep jump cutting’s quantity Max to 7 times ,cutting gap is Min 30mm. |
|
Utility |
AC 3φ 3w 380／220V 2.5Kw |
|
|
AIR 0.5Mpa(5kg/cm2 290NL/Min DRY AIR |
|
Collect dust machine(optional) |
MP-15L 750W φ100mm |
|
|
Max wind flow ： 15 m3 ／min |
|
|
Max static pressure ： 75㎜／Aq |
|
Machine dimensions |
（length）1800㎜ （width）1925㎜ （height）1750㎜ |
|
|
Table ‘s height 820㎜ |
|
Machine’s weight |
About 1700㎏ |
Motor:export from Germany
