detailed description:

1. Processing plate thickness up to 0.3mm lowest

2. full service to process different kinds of PCB board,as FR-4,Aluminium Plate

3. full service to process different kinds of PCB board,as FR-4,Aluminium Plate

4. prevent cutter collision, avoid human error

5. high precision for +/- 0.05mm, high production rate (max speed for 40M/min)

6. with direct high spindle Motor(15,000rpm), with good quality

7. with one-body shape base, the stress elimination ,strong rigidity and good stability

8. Chinese interface operation,file management ,easy operation ,high stability, easy to learn and

    understand

9. automatic plate width,thickness, residual thickness and V cut position setting (all controlled by

    servo-motor and servo-controller)

detailed specification:

1. processing width:Min 110mm~ Max 630mm

2. processing length:Min 45mm~ Max 630mm

3. hole edge distance:8mm from PIN hole center to V-cut

                                   8mm from left-PIN hole center to left plate edge,100mm for each hole

                                   8~15mm from PIN hole center to bottom plate edge

                                   PIN hole diameter for 3.175mm (changeable according to customers 

                                   requests)

4. processing board thickness:0.3~3.2mm

5. V-cut processing numbers: each for 100 at most(A side for 100, B side for 100, total 200)

6. V-cut residual thickness precision:+/- 0.05mm

7. V-cut spacing precision  :+/- 0.05mm

8. V-cut parallel precision :+/- 0.05mm

9. computer spec.: WindowsXP Professional, screen for 17 inches LCD TFT

10. processing spindle : 2 pieces for direct high speed motor, AC 400W,6000~15000RPM

11. blade spec : 120*2*25.4*20Z(30°,45°,60°)

12. blade move :   0.4Kw servomotor, max 60M/min (setting freely)

13. processing speed: max 40M/min (jumping blade for 25M/min),setting freely

14.jumping blade structure: control jumping-blade processing by servomotor,jumping blade 

     minimum gap for 15mm ,jumping processing data up to 20 at most

15. processing clamp : moving based on 0.4Kw servomotor, Max speed for 60M/min

16. clamp : 6 pieces ,with cylinder

17. Utility : power AC 3mm 380V 2.5Kw ; AIR 0.5Mpa(5kg/square centimetre),50NL/Min dry air flow

                  ;dust absorption,interface for 100mm*1, windy flow for 15 cubic meter per minute at  

                  least,minimum pressure for 550m/Maq

18. machine shape: length 1695mm * width 2240mm * height1326mm,including machine leg 100, 

                                without displayer,table height for 920mm

19. net weight: about 1600kg

20.Motor:     export from Germany. 

Package ways :  with wooden case packing

Payment ways :  30% advanced payment before producing, 70%  paid before shipping