detailed description:
1. Processing plate thickness up to 0.3mm lowest
2. full service to process different kinds of PCB board,as FR-4,Aluminium Plate
3. full service to process different kinds of PCB board,as FR-4,Aluminium Plate
4. prevent cutter collision, avoid human error
5. high precision for ± 0.05mm, high production rate (max speed for 40M/min)
6. with direct high spindle Motor(15,000rpm), with good quality
7. with one-body shape base, the stress elimination ,strong rigidity and good stability
8. Chinese interface operation,file management ,easy operation ,high stability, easy to learn and
understand
9. automatic plate width,thickness, residual thickness and V cut position setting (all controlled by
servo-motor and servo-controller)
detailed specification:
1. processing width:Min 110mm~ Max 630mm
2. processing length:Min 45mm~ Max 630mm
3. hole edge distance:8mm from PIN hole center to V-cut
8mm from left-PIN hole center to left plate edge,100mm for each hole
8~15mm from PIN hole center to bottom plate edge
PIN hole diameter for 3.175mm (changeable according to customers
requests)
4. processing board thickness:0.3~3.2mm
5. V-cut processing numbers: each for 100 at most(A side for 100, B side for 100, total 200)
6. V-cut residual thickness precision:± 0.05mm
7. V-cut spacing precision :± 0.05mm
8. V-cut parallel precision :± 0.05mm
9. computer spec.: WindowsXP Professional, screen for 17 inches LCD TFT
10. processing spindle : 2 pieces for direct high speed motor, AC 400W,6000~15000RPM
11. blade spec : 120*2*25.4*20Z(30°,45°,60°)
12. blade move : 0.4Kw servomotor, max 60M/min (setting freely)
13. processing speed: max 40M/min (jumping blade for 25M/min),setting freely
14.jumping blade structure: control jumping-blade processing by servomotor,jumping blade
minimum gap for 15mm ,jumping processing data up to 20 at most
15. processing clamp : moving based on 0.4Kw servomotor, Max speed for 60M/min
16. clamp : 6 pieces ,with cylinder
17. Utility : power AC 3mm 380V 2.5Kw ; AIR 0.5Mpa(5kg/square centimetre),50NL/Min dry air flow
;dust absorption,interface for 100mm*1, windy flow for 15 cubic meter per minute at
least,minimum pressure for 550m/Maq
18. machine shape: length 1695mm * width 2240mm * height1326mm,including machine leg 100,
without displayer,table height for 920mm
19. net weight: about 1600kg
20.Motor: export from China,Taiwan.
Package ways : with wooden case packing
Payment ways : 30% advanced payment before producing, 70% paid before shipping